Guns Inc. Gunsmithing Services

If you are looking for information on our "In Store Gunsmithing Services"

Please call (610) 454-7375 or email nevin@gunsinc.com

 

We are currently building out this page - please check back soon for a list of products, services, and prices.

General Shop Services
Rates
1 Man Hour - $60.00
Manual labor charge for one hour of work by a certified gunsmith.
1 Machine Hour - $75.00
Manual labor charge for one hour of work by a certified gunsmith when major machinery is involved.
Diagnostics - $30.00
Diagnostic charge when a firearm is turned in for a problem of unknown origin.
Minimum Charge - $25.00
Minimum shop charge for taking in work.
Disassembly/Reassembly Surcharge - $25.00
This charge is applied if disassembly and reassembly of a firearm or component is needed in the course of performing another service.
Cleaning Surcharge - $10.00
This charge is applied if specific cleaning is needed to perform a service on an unclean firearm.
Test Fire Surcharge - $15.00
Test firing may be required for certain services. We use high quality factory ammunition to ensure your firearm will function properly with store bought ammunition.
Universal Scope Services
Boresight Long Gun - $25.00
Will provide point of impact on paper at 100yrds.
Boresight Handgun - $25.00
Will provide point of impact on paper at 25yrds.
Scope Base Mounting - $15.00
This service covers the proper mounting of a scope base or rail system to most firearms. This does not include drilling/tapping holes, mounting the rings, or mounting the actual scope.
Scope Ring Lapping - $25.00
Scope Ring Lapping corrects the imperfections found on most scope rings. This is a critical step for maximizing the precision and lifespan of premium optics.
Scope Mounting and Boresight - $35.00
Even the highest dollar optic will fail if mounted improperly. A professionally mounted scope maximizes accuracy through consistency and prevents damage from torque or slippage.
Universal Services
Headspace Check - $40.00
Headspace is the measurement between the bolt face and where the cartridge stops in the chamber. Excessive or inadequate headspace can be caused by improper fitting or extreme wear and can lead to catastrophic failure. We can measure your headspace and provide you with pass or fail results along with any recommendations.
Chamber Casting - $40.00
We use chamber casts to measure critical dimensions within the chamber. This is often requested for determining specifications on an unknown chamber in old or custom firearms. We also use this service to help determine erosion that may be occurring. Most measurements can be taken upon request. Please note: The casting itself is not given to the customer.
Muzzle Casting - $20.00
Muzzle casting is used to determine the amount of muzzle erosion that has occurred after excessive firing. Please note: the casting itself is not given to the customer.
Firearm Research - $25.00
This service is used to determine the history of your firearm. Typically, we will gather information like: Historical significance, location and year of manufacture, notes on mechanical and finish condition, and what we would estimate the retail value is.
Drill and Tap, Per Hole - $25.00
We can drill and tap most receivers and barrels. Check with us for thread pitch sizes. Plug screws are extra.
Remove a Stripped Screw - $25.00 +
Cost may increase depending on the situation. Extra services may be required to restore the usability of the threaded hole.
Remove a Stuck Casing - $30.00
Cost may increase in certain situations.
Remove a Stuck Live Round - $60.00
This is a very dangerous situation. Let us take the risk and professionally remove the live round safely without causing damage.
Clear an Obstructed Bore - $25.00 +
Cost may increase in certain situations. Damage may have occurred from the obstruction, more repairs may be required to make the firearm serviceable.
Rifle Services
AR15/AR10
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $50.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Maintenance Tune-Up - $125.00
This service includes cleaning, lubrication, replacement of all the internal springs, replacement of the gas rings, and our 40 point safety inspection.
Complete Assembly of an Upper Receiver - $65.00
We will install every component and torque your barrel to the proper specifications. Please note: No parts are included in this price. You are welcome to provide your own parts or have our gunsmiths source parts for you.
Complete Assembly of a Lower Receiver - $65.00
We will install every component and make sure everything is functioning properly. Please note: No parts are included in this price. You are welcome to provide your own parts or have our gunsmiths source parts for you.
Complete Assembly of an Entire Rifle - $120.00
We will install every component on your stripped receivers to industry standards. Please note: No parts are included in this price. You are welcome to provide your own parts or have our gunsmiths source parts for you.
Truing the Upper Receiver - $50.00
Factory machining processes and anodizing often leave the face of the receiver with an uneven finish. When torque is applied to this uneven surface it can pull the barrel out of concentricity. We will provide an even, concentric surface for proper barrel mounting.
Barrel Extension Bedding - $50.00
Barrel to receiver fit is often sloppy. Some shooters prefer that this slop be removed. With this service we will make your upper receiver and barrel a true one-to-one fit. Please note: It is recommended that the receiver be trued before the service is performed.
Trigger Swap (Standard) - $35.00
This service covers swapping out your current trigger with any standard drop-in style trigger group.
Trigger Swap (Adjustable) - $50.00
This service covers swapping out your current trigger with most triggers that require adjustment. We will adjust the trigger to your specifications. Please note: The lowest we will set trigger weight to is 3.5lbs.
Thread Barrel - $125.00
We will remove your barrel and thread the muzzle concentric to the bore. Cutting the barrel, re-crowning, and adjustments to the gas port are included if needed or requested.
Crown Barrel - $100.00
We will remove your barrel and re-crown the muzzle to your specifications. Cutting the barrel, and adjustments to the gas port are included if needed or requested.
Dimple Barrel for Gas Block - $15.00
This is the price for a single dimple. Customer will need to provide the gas block or have the gunsmith source one for them. Please note: This price is for a barrel that is already removed from the receiver. Disassembly/Reassembly Surcharge will apply for complete uppers.
AK47/AK74
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $50.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Complete Rifle Build - $325.00
This price covers most standard rifle and pistol builds. Please note: Receiver, parts, and de-milling is not included in this price.
De-mil Parts Kit - $50.00
Most AK parts kits are the result of former Soviet nations cutting complete rifles apart to make them inoperable. This service will cover the work necessary to return the parts to their pre-assembled condition.
Install Scope Mount - $65.00
We will professionally install a side mounted scope rail to your rifle or pistol. Please note: This price does not include parts. You may provide your own mount or have our gunsmiths source one for you.
Bolt Action
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $50.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Install an Aftermarket Bolt Knob (Rem 700) - $125.00
This service covers turning down and threading the bolt handle and installing the bolt knob. Please note: This service does not include parts or refinishing.
Thread Barrel - $125.00
We will thread your muzzle to your specifications and concentric to the bore. Cutting and re-crowning is included if needed or requested. Please note: Sight relocation, if needed, is extra. We only remove the barrel if we have to. If this is a concern for you please let us know.
Crown Barrel - $100.00
We will re-crown the muzzle to your specifications. Cutting the barrel, if requested, is included in this price. Please note: Sight relocation, if needed, is extra. We only remove the barrel if we have to. If this is a concern for you please let us know.
Jewel Bolt - $120.00
Jewelling or engine turning is the process of polishing the surface in overlapping circular patterns. This adds aesthetic appeal and will also retain oil better than a standard polish.
Lever/Pump Action
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $75.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Break Action
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $75.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Rimfire
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $50.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Ream Chamber Burr - $35.00
When rimfires are dry fired the firing pin strikes the mouth of the chamber. If this is done excessively a burr will form and cause cycling issues. We can remove this burr with precision so the rest of the chamber is not affected.
Drill a Cleaning Hole in Ruger 10/22 - $45.00
This service will allow you to clean your 10/22 from the rear without removing the barrel.
Jewel Bolt (Semi-Auto) - $75.00
Jewelling or engine turning is the process of polishing the surface in overlapping circular patterns. This adds aesthetic appeal and will also retain oil better than a standard polish.
Thread Barrel - $100.00
We will thread your muzzle to your specifications and concentric to the bore. Cutting and re-crowning is included if needed or requested. Please note: Sight relocation, if needed, is extra. We only remove the barrel if we have to. If this is a concern for you please let us know.
Crown Barrel - $75.00
We will re-crown the muzzle to your specifications. Cutting the barrel, if requested, is included in this price. Please note: Sight relocation, if needed, is extra. We only remove the barrel if we have to. If this is a concern for you please let us know.
Shotgun Services
Universal Shotgun Services
Lengthen Forcing Cone (Non-Chrome Lined) - $60.00
The forcing cone is where the chamber transitions down to the bore diameter in shotgun barrels. Lengthening the forcing cone provides a gradual transition for the shot, reducing shot deformation. This service, combined with a good set of chokes, will greatly increase the versatility and performance of your shotgun. Please note: This service is only available for 10, 12, and 20 gauge chambers.
Polish Bore (Non-Chrome) - $35.00
This is one more step on the road to consistent and effective shot patterns. We will polish your bore to a mirror shine. This also reduces the amount of moisture and plastic fouling that get trapped in the barrel.
Add or Relocate a Sight Bead (Per Bead) - $35.00
This service covers drilling, tapping, and installing your bead. Bead of your choice is also included.
Remove Dent - Varies,Please contact us to speak with a gunsmith about removing a barrel dent.
Straighten Bent Barrel - Varies,Please contact us to speak with a gunsmith about straightening a barrel.
Pump Action
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $50.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Cut and Crown Barrel - $60.00
This service includes cutting and crowning a barrel. Minimum length is 18.5. Please note: This service does not include relocating sights or beads.
Cut and Crown Barrel (Ribbed) - $75.00
This service includes cutting and crowning a barrel. Minimum length is 18.5. Please note: This service does not include relocating sights or beads.
Re-Crown Only - $35.00
The thin wall of shotgun crowns can be easily gouged or dented. This service will clean up and true your crown to the bore axis.
Re-Crown Only (Ribbed) - $50.00
The thin wall of shotgun crowns can be easily gouged or dented. This service will clean up and true your crown to the bore axis.
Add Choke Tube Threads (Non-Chrome) - $120.00
This service includes reaming, threading, and re-crowning your barrel to accept the choke thread of your choice. Please note: Some barrels are too thin to have this service performed. Contact us to speak with a gunsmith. This service does not include sight work. At least one choke tube is required (not included) to protect the threads. You may provide your own or have our gunsmiths source one for you.
Open Up a Fixed Choke (Non-Chrome) - $65.00
We will open your fixed choke to match your specifications. We will also re-crown your barrel to optimize your shot pattern.
Add Ghost Ring Sights (870/500) - $75.00
This service covers drilling, tapping, installing, and boresighting. Please note: Sights are not included. You may provide your own or have our gunsmiths source them for you.
Semi-Auto
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $75.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Adjust Cycling for Light Loads - $65.00
We will diagnose and adjust the areas necessary to allow the firearm to operate reliably with lighter loads. Please note: Setting up the firearm to run lighter loads could prevent you from using heavy or magnum loads. Please contact us if you have questions.
Cut and Crown Barrel - $75.00
This service includes cutting and crowning a barrel. We will also test and adjust the cycling, if needed. Minimum length is 18.5. Please note: This service does not include relocating sights or beads.
Cut and Crown Barrel (Ribbed) - $100.00
This service includes cutting and crowning a barrel. We will also test and adjust the cycling, if needed. Minimum length is 18.5. Please note: This service does not include relocating sights or beads.
Re-Crown Only - $35.00
The thin wall of shotgun crowns can be easily gouged or dented. This service will clean up and true your crown to the bore axis.
Re-Crown Only (Ribbed) - $50.00
The thin wall of shotgun crowns can be easily gouged or dented. This service will clean up and true your crown to the bore axis.
Add Choke Tube Threads (Non-Chrome) - $120.00
This service includes reaming, threading, and re-crowning your barrel to accept the choke thread of your choice. Please note: Some barrels are too thin to have this service performed. Contact us to speak with a gunsmith. This service does not include sight work. At least one choke tube is required (not included) to protect the threads. You may provide your own or have our gunsmiths source one for you.
Open Up a Fixed Choke (Non-Chrome) - $65.00
We will open your fixed choke to match your specifications. We will also re-crown your barrel to optimize your shot pattern.
Double Barrel
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $100.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Cut and Crown Barrel - $75.00
This service includes cutting and crowning both barrels. Minimum length is 18.5. Please note: This service does not include relocating sights or beads.
Re-Crown Only - $35.00
The thin wall of shotgun crowns can be easily gouged or dented. This service will clean up and true your barrel crowns.
Handgun Services
Semi-Auto
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $30.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Replace Sights (Standard) - $35.00
The service covers the complete replacement of your sights and boresighting. Please note: Standard in this case covers handguns that don’t require excessive fitting or staking. Sights are not included.
Replace Sights (Fit or Staked) - $65.00
This service covers replacing sights and boresighting on handguns that will require fitting and/or staking. Please note: Sights are not included.
Action Job - $125.00
We will disassemble, clean, and precision polish the internal components to remove factory machine marks on the bearing surfaces. After lubrication and reassembly we will test fire to verify our work.
De-horn for Concealed Carry - $65.00
De-horning is the process of breaking the sharp edges to mitigate the chance of your handgun snagging on clothing. Please note: This is the typical cost for this service. Prices may increase or decrease depending on the firearm. Refinishing is not included.
Revolver
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $45.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Replace Sights (Standard) - $35.00
The service covers the complete replacement of your sights and boresighting. Please note: Standard in this case covers handguns that don’t require excessive fitting or staking. Sights are not included.
Replace Sights (Fit or Staked) - $65.00
This service covers replacing sights and boresighting on handguns that will require fitting and/or staking. Please note: Sights are not included.
Crown Barrel - $75.00
We will re-crown the muzzle to your specifications. Cutting the barrel, if requested, is included in this price. Please note: Sight relocation, if needed, is extra. We only remove the barrel if we have to. If this is a concern for you please let us know.
Action Job - $135.00
We will disassemble, clean, and precision polish the internal components to remove factory machine marks on the bearing surfaces. After lubrication and reassembly we will test fire to verify our work.
De-horn for Concealed Carry - $65.00
De-horning is the process of breaking the sharp edges to mitigate the chance of your handgun snagging on clothing. Please note: This is the typical cost for this service. Prices may increase or decrease depending on the firearm. Refinishing is not included.
Remove/Modify Hammer Spur - $35.00
We will remove or modify your hammer spur to your specifications. Please note: This service does not cover refinishing.
Straighten Bent Ejector Rod - $35.00
Even slightly bent ejector rods can have a detrimental effect on your revolver's performance. With this service we will straighten the rod and ensure it operates smoothly. Please note: Severely bent rods will require replacement. Replacement parts are not included in this price.
Adjust Cylinder Endshake - $45.00
Endshake is the forward and backward movement of the cylinder. Too much endshake and you'll notice a drop in accuracy, spatter from the forcing cone, etc. Too little endshake and the cylinder will want to bind during cycling. This service will cover the adjustment of your endshake to return it to the manufacturer's specifications.
Re-Set Cylinder Timing - $70.00
If your hammer reaches the fully cocked position before the cylinder is locked in place, your revolver timing is off. This can cause accuracy problems, spitting/spattering at the cylinder gap, or even catastrophic failures. This service covers resetting your revolver's timing to fall back within factory specifications. Parts are included in this price.
Chamfer Cylinder Chambers - $45.00
Factory cylinders are often sold with a sharp leading edge on the chambers that can impede loading and unloading. With this service we will disassemble your cylinder and polish the chamber edges to allow your cartridges to slip in and out with ease.
1911
Full Cleaning, Lubrication, and 40 Point Safety Inspection - $30.00
We will disassemble and professionally clean and lubricate your firearm. While we have your firearm apart we will inspect it to ensure it is safe to use. Recommendations will be made based on what we find.
Replace Sights (Standard) - $35.00
The service covers the complete replacement of your sights and boresighting. Please note: Standard in this case covers handguns that don’t require excessive fitting or staking. Sights are not included.
Replace Sights (Fit or Staked) - $65.00
This service covers replacing sights and boresighting on handguns that will require fitting and/or staking. Please note: Sights are not included.
Action Job - $125.00
We will disassemble, clean, and precision polish the internal components to remove factory machine marks on the bearing surfaces. After lubrication and reassembly we will test fire to verify our work.
De-horn for Concealed Carry - $65.00
De-horning is the process of breaking the sharp edges to mitigate the chance of your handgun snagging on clothing. Please note: This is the typical cost for this service. Prices may increase or decrease depending on the firearm. Refinishing is not included.
Tighten Frame to Slide Fit - $100.00
Loose tolerences and heavy use over time can cause a sloppy slide to frame fit. This loosness can lead to inaccuracy. This service includes peening your frame rails and re-fitting them to match your slide. Different levels of tightness can be achieved for different applications. We will do the fitting to your specifications. Please note: This service is for slide to frame fit only. This price does not include parts, refinishing, or other adjustments that may need to be made afterwards. This modification will yield the best results when combined with our other accurizing services.
Fit Non-Ramped Barrel - $125.00
The greatest contributing factor to accuracy is your barrel quality and fit. This service includes precision fitting a new barrel to your firearm. Please note: This service is for barrel fitting only. This price does not include parts, refinishing, or other adjustments that may need to be made afterwards. This modification will yield the best results when combined with our other accurizing services.
Fit Barrel Bushing - $75.00
The barrel bushing is what anchors the muzzle. A loose or improperly fit bushing can lead to an inconsistant barrel return after each shot. We will precision fit a new bushing to eliminate these variables. Please note: This service does not include parts or refinishing.
Bevel Magazine Well - $50.00
This service includes beveling the frame's magwell to allow for easier insertion of the magazine. Please note: This service does not include refinishing.
Lower and Flare Ejection Port - $65.00
Opening and flaring the ejection port is asthetically pleasing and provides a more reliable and consistant ejection pattern. Please note: This service does not include parts or refinishing.
Fit and Install Trigger - $35.00
Fit and Install Hammer - $35.00
Fit and Install Beavertail - $125.00
Fit and Install Safety - $45.00
Fit and Install Ambi Safety - $55.00
Tune Extractor - $25.00
Even a brand new extractor needs to be tuned to optimize it's performance. With this service we will shape, polish, and adjustust tension on your new or existing extractor. Please note: This price does not include parts.
Re-Stake Plunger Tube - $35.00
Mill Cocking Serrations - $75.00
Mill Flattop and Serrate - $125.00
Custom Builds
Bolt Action
Blueprint Action - $200.00
Blueprinting an action is the process of truing the critical surfaces to properly align them with the bolt bore axis and provide a near perfect interface for a custom fit barrel. This process eliminates variables that result in inconsistencies down range. We will true the face of the receiver, receiver threads, lug surfaces, bolt nose, and bolt face. Please note: This service is for the action only. Factory barrels will not be adapted or re-installed after the truing process is complete. This service is designed to set up the action for installation of a custom fit barrel.
Chamber and Fit Barrel Blank to Action - $200.00
This service includes threading the barrel shank, chambering, muzzle crowning/threading, contouring and matte bluing a barrel blank to an existing action. Pleas note: This price does not include the barrel blank, action, or parts. If you have a mass produced factory action it is recommended that you have us blueprint your action first. The highest level of accuracy can only be obtained when all of the bearing surfaces have been trued to the bore.
Precision Rifle Package - $400.00
This service includes both the bluprinting of your supplied action and the precision fitting and chambering of a barrel blank. Doing this will squeeze every bit of accuracy out of your barreled action. Please note: This price does not include the action, barrel blank, or parts.
1911
Refinishing Services
Bluing
Matte Finish
Standard Long Guns - $150.00
We will disassemble, de-grease, media blast, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Semi-Auto Handguns - $100.00
We will disassemble, de-grease, media blast, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Revolvers - $125.00
We will disassemble, de-grease, media blast, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Gloss Finish
Standard Long Guns - $250.00
We will disassemble, de-grease, polish the major components to a minimum 400 grit finish, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Semi-Auto Handguns - $175.00
We will disassemble, de-grease, polish the major components to a minimum 400 grit finish, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Revolvers - $200.00
We will disassemble, de-grease, polish the major components to a minimum 400 grit finish, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Mirror Finish
Standard Long Guns - $350.00
We will disassemble, de-grease, polish the major components to a mirror shine, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Semi-Auto Handguns - $275.00
We will disassemble, de-grease, polish the major components to a mirror shine, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Revolvers - $300.00
We will disassemble, de-grease, polish the major components to a mirror shine, professionally blue, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Parkerizing
Standard Long Guns - $150.00
We will disassemble, de-grease, media blast, professionally parkerize, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Semi-Auto Handguns - $100.00
We will disassemble, de-grease, media blast, professionally parkerize, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Standard Revolvers - $125.00
We will disassemble, de-grease, media blast, professionally parkerize, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Military Rifles - $175.00
This service is specifically for the older surplus firearms including: M14/M1A, M1 Garand, M1 Carbine, SKS, etc. We will disassemble, de-grease, media blast, professionally parkerize, and reassembled your firearm. Please note: Firearms with heavy rust, pitting, or other serious surface issues will add to the overall cost at the normal hourly shop rate. Some surface deformations will not be possible to remove. Our gunsmiths will do everything possible to achieve the best results with your firearm.
Post Treatment Darkening - $35.00
Most firearms produce a light gray or charcoal finish. This service will provide a darker finish after the parkerization process has occurred.
Cerakote
One Color
Standard Long Guns - $225.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote color, and reassemble your firearm.
Standard Semi-Auto Handguns - $175.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote color, and reassemble your firearm.
Standard Revolvers - $200.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote color, and reassemble your firearm.
AR/AK Type Rifles - $275.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote color, and reassemble your firearm.
Individual Parts,Varies,Prices vary. Please contact us for more information.
Multi-Color
Standard Long Guns - $275.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote colors, and reassemble your firearm.
Standard Semi-Auto Handguns - $225.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote colors, and reassemble your firearm.
Standard Revolvers - $250.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote colors, and reassemble your firearm.
AR/AK Type Rifles - $400.00
We will disassemble, degrease, media blast, professionally apply your choice of Cerakote colors, and reassemble your firearm.
Individual Parts,Varies,Prices vary. Please contact us for more information.
Camouflage
Standard Long Guns - $325.00
We will disassemble, degrease, media blast, professionally apply your choice of camouflage pattern, and reassemble your firearm. Please note: Camouflage patterns are limited. Our gunsmiths will help you choose the pattern that will best suit your needs.
Standard Semi-Auto Handguns - $275.00
We will disassemble, degrease, media blast, professionally apply your choice of camouflage pattern, and reassemble your firearm. Please note: Camouflage patterns are limited. Our gunsmiths will help you choose the pattern that will best suit your needs.
Standard Revolvers - $300.00
We will disassemble, degrease, media blast, professionally apply your choice of camouflage pattern, and reassemble your firearm. Please note: Camouflage patterns are limited. Our gunsmiths will help you choose the pattern that will best suit your needs.
AR/AK Type Rifles - $475.00
We will disassemble, degrease, media blast, professionally apply your choice of camouflage pattern, and reassemble your firearm. Please note: Camouflage patterns are limited. Our gunsmiths will help you choose the pattern that will best suit your needs.
Individual Parts,Varies,Prices vary. Please contact us for more information.
Stock Work
Stock Repairs
Repair Crack - $25.00 +
Repair Stripped Screw Hole (Per Hole) - $25.00
Stock Alterations
Install Sling Swivel Stud - $35.00
Install Sling Swivel QD Cup - $45.00
Drill and Install Recoil Reducer - $75.00
Freefloat Barrel - $65.00
Glass Bed Barrel and Action - $125.00
Pillar Bed Action - $150.00
Install and Fit Recoil Pad - $65.00
Adjust Length of Pull - $35.00
Laser Engraving
Firearms
Knives